If you are using a modem-router (gateway), you might need to enter 192.168.11.1. Make sure you are connected to the router, open a web browser and enter in a web browser or go to 192.168.1.1. To access some advanced settings, you need to open the browser-based utility. Once you are finished with the setup, please be sure to register your router so we can keep you informed security updates, product recalls and other things that will improve your experience.Note-If none of those options take you to the setup wizard, go to You also can enter 192.168.1.1 in a browser to start setup. Follow the on-screen instructions to complete setup. Note-You will not have internet access until the router setup is complete. (You can change the network name and password later.) Select the option to automatically connect to this network in the future.
Connect to the network name shown in the Quick Start Guide that came with your router.If you have a modem router, plug the other end into any available port. If you have a modem, plug the other end into the Ethernet (LAN) port on the modem. Connect your new router to your modem or modem router.Ī Modem OR B Modem-Router Plug one end of the included ethernet cable into the yellow Internet port on your new router.Make sure the power switch is in the | (ON) position. If replacing an existing router, disconnect that router first.
#LINKSYS ROUTER RECONFIGURATION CODE#
Please contact for questions or GPL source code requests.
#LINKSYS ROUTER RECONFIGURATION SOFTWARE#
Note-Licenses and notices for third-party software used in this product may be viewed on. In addition to this user guide, you can find help at /support/E9450(documentation downloads, FAQs, technical support, live chat, forums) Reset button (7)-Press and hold until the power LED starts flashing to reset the router to factory settings. Power switch (6)-Press | (ON) to turn on the router. Power port (5)-Connect the included AC power adapter to this port. The light under the port will light up only when an Ethernet cable is plugged in and there is data traffic on the cable. Internet port (4)-Connect an Ethernet cable to this port and to your modem. The lights under the ports will light up only when an Ethernet cable is plugged in and there is data traffic on the cable. USB 3.0 port (2)-Connect and share a USB drive on your network.Įthernet ports (3)-Connect Ethernet cables (also called network or internet cables) to these Fast Ethernet (10/100/1000) ports and to other wired devices on your network. The light under the button will blink while WPS pairing is active. Wi-Fi Protected Setup™ (WPS) button (1)-Press to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices.
0 kommentar(er)
